5
Fig14
Carriage and hoist
If the installation is a litter farther needing carriage,
please execute as per the following instruction
：
A Regarding the ropes, one is 2X1.5m and the
other is 2X2m. The position to hoist is as per the
Fig14.
B Use the proper lifting device to lift it and the N.T
of the machine is 987kg
。
Whenever move the machine, you should care
about safety and meet the condition to hoist.
3 Installation:
Max. overall dimension and installation space
（
Fig 15
）
：
Max. height
：
1750mm width
：
1900 mm Max.
length
：
2600 mm
Fig 15
overall dimension and installation space
Choose the site safety and convenient to connect
in accordance with the related labor and safety
regulation. The floor to install the machine must be
flat and the enough space should be left around
the machine for the convenience to move and
operate the machine. After the installation of the
machine, use the plug bolt to fix at the 3 fixing
angle iron.
（
Fig 16
）
Fig 16 fixing angle iron
If it is installed outdoors, the machine must be
equipped with the shed to protect the rain.
Electrical
and
pneumatic
connection
：
1 Electrical connection
（
Fig17
）
Fig17 Electrical connection
All the work related to the electrical system must
be executed by the qualified professional
personnel.
Check if the power supply is corresponding with
！
It is forbidden to use the machine outdoors
2600mm
17
50
m
m
DTM590
DUNLOP GARAGE EQUIPMENT
