Loading Coil Nails
Step No. 1
– Grasp the nailer handle firmly with one
hand and with the other hand unlatch the magazine
cover clip. Swing the magazine door open.
Step No. 2
– Adjust the loading tray for nail length (if
required) by depressing the button on the post and
raising or lowering the tray to the desired position.
Step No. 3
– Remove the band from a nail coil and
place the nail coil in the magazine with the tips of the
nails against the loading tray and with about 4 inches
of coil unwound. Make sure the coil is centered over
the post.
Step No. 4
- Slide the free strip of nails along the top of
the feeder body assembly and place the first nail in the
nose of the tool with the head of the nail on the magnet.
Step No. 5
- Carefully close and latch the magazine door.
Step No. 6
- The nailer is now ready for use.
12
Fasteners
The
Duo-Fast
®
Cordless Roofing Nailer drives Roofer’s
Choice
®
coil nails designed to be used with the tool.
The use of fasteners that do not meet
Duo-Fast
®
stan-
dards could cause tool damage and will void all
warranty
claims.
Preparing the Cordless Roofing Nailer for Use
