15
Servicing
Air Filter
Open the grille by pressing slightly above the adapter and
pivoting the cover open. The air filter simply lifts out.
Tap the filter GENTLY to remove any dust. Check and clean
the air filter every two days. Soap and water restores the
filter to a "like new" condition.
End-of-Workday Routine
These simple steps are based on maintaining the safety
and operational efficiency of the Cordless Roofing Nailer.
Before you leave the work site:
1.
Remove battery and store in tool case. Always use
the Cordless Roofing Nailer case for transporting
and storing the tool.
2.
Dispose of all empty fuel cartridges. Remember to
dispose of these cartridges where they will not be
crushed, punctured, burned or found by children.
When you get home:
1.
Place the battery in its charger if it needs charging as
indicated by the red charge light on the handle.
2.
Wipe your Cordless Roofing Nailer with a clean, soft
cloth.
3.
Remove and clean the filter every two days.
4.
Check work contacting element and the nail feed area to
ensure it is operating
freely. Remove any tar build-up
with Paslode Cordless Tool Cleaner.
Duo-Fast
®
Cordless Tool Accessories
A variety of accessories are available for the
Duo-Fast
®
Cordless Roofing Nailer:
Battery - Part No. 902336
Clear Safety Glasses - Part No. 401382
Duo-Fast
®
Cordless Lubricating Oil - Part No. 902331
Battery Charger Kit - Part No. 902327
Automotive Adapter - Part No. 902333
Contact your
Duo-Fast
®
representative for additional
information.
Tools
A 5/32 Hex Wrench (Part No. 401331), 9/64 Hex Wrench
(Part No. 900736), and a 3/16 Hex Wrench ( Part No.50144)
are provided with each cordless roofing nailer.
Backpack Tool Case - Part No. 904605
Cordless Tool Cleaner - Part No. 219348
Tool Safety Tether - Part No. 904548
GRILLE
FILTER
CAP
CAP
GRILLE
FILTER
