INSTRUCTION MANUAL FOR WINDSHIELDREPAIR WITH DART
1 - 3
Place the inspection mirror on the inside of the windshield behind the impact.
Remove any moisture and dirt from the impact by using Prep-Clean.
Bring the DART plunger forward by turning it clockwise until a small space is created in the injector.
Apply two to three drops of UV resin and turn DART into the sputnik head.
2 1
Turn the plunger counter clockwise = vacuum until it is completely out of the thread.
Increase the vacuum even more by pulling out the plunger to position 1 or 2 for even more vacuum.
To fix the plunger, turn the plunger a quart turn and DART is under vacuum.
