User Manual
30
Place the IC card that needs to be added near the NFC module of the phone. After reading
the information of IC card, the setting window will pop up. Set the KWh and click ok to add. If
there is no response, please change a few more areas to stick, or ask the mobile phone
manufacturer to confirm the location of the NFC module.
The charger owner use the APP to issue CARDS to the user according to the user's demand,
and sets the KWh limit of IC card according to the need. Which chargers can be used and
which chargers can not be used for the IC card set (all Settings are for offline storage, the
electricity information is saved on the IC card, and the authentication information is saved on
the charger)
;
3
、
Use the specified IC card to the corresponding charger, and the card starts charging.
When the charge is completed, the charge can be stopped by swiping the card again.
IC card ID
IC card
effectivetime
Input IC
card KW/h
Put the IC card
near the NFC
module
of
mobile
phone
again,
then
activate the card
IC card enable