DBM70 Instruction ver 1.doc
Page 8
3/12/01
4.4 Paper Width Settings:
1.
Both sides guides should be adjusted for a given size of paper. Loosen the thumbscrews and
move the side guides until their outside edges are level with the marking on the scale
corresponding to the width of the paper, and then re-tighten the thumbscrews so that the guides
are held in place.
Side guide
scale
Side guide
clamp thumbscrew
Side guide
Figure 4 - Side guides.
2.
Note that the marked settings are meant to be wider than the paper, to allow for side jog.
Both guides move inwards on each cycle to the correct width to ensure that the sheets are
aligned before stapling occurs.
Summary of Contents for DBM-70
Page 1: ......
