2
163
Troubleshooting
When Messages Appear
5
Message
Status and Solution
Status: The waste box has become full during processing.
Solution: Remove the accumulated waste from the waste box and then
press the STOP key.
(
→
P.187 J9 WASTE BOX)
Status: There is a document jam in the reject area.
Solution: Remove the document from the reject area and then press
the STOP key.
(
→
P.188 J10 REJECT AREA)
Status: Waste that may cause a document jam remains in the waste
box during processing.
Solution: Remove the waste from the waste box and then press the
STOP key.
(
→
P.191 J11 WASTE BOX)
Status: The document length that was saved at JOB entry is di
ff
erent
from that of the document that is actually fed.
Solution: Check if the
fi
nished products at the exit area is correctly
processed.
(
→
P.192 J12 DOCUMENT LENGTH)
J9-*
WASTE BOX
J10-*
J9-*
J10-*
REJECT AREA
J11-*
WASTE BOX
J11-*
J12-*
Remove document
from waste box
to clear
Remove document
from reject area
to clear
Remove document
from waste box
to clear
Remove document
from exit
to clear
J12-*
Machine stopped
Document is too
long
