18
5. PREPARING FOR OPERATION
Stitching position label
Mark (Stitch prohibited area)
Pointer
Make sure the mark does not enter area A
A
A
❊
Stitch prohibited area
The position at which the folding knife and a stitch
coincide is called the stitch prohibited area.
During folding operations, the folding knife may bend the
stitch if they touch.
When a standard stitching position determined by the
paper width entered is inside the stitch prohibited area, the
position avoids this area automatically.
Note
Note
When adjusting the stitching width, avoid the
stitching prohibited area.
120 to 356
14
(0.55)
14
(0.55)
35
(2.76)
35
(2.76)
Center line of paper width
Paper conveyance direction
Stitching position
Stitching position
Unstitchable area
Unit: mm (inch)
The stitching position cannot be within 14 mm/0.55 inch
from both edges of the paper.
The stitching width cannot be within 70 mm/2.76 inch.
6 (0.24)
Paper conveyance direction
P
aper width
Unit: mm (inch)
Side stitching (corner stitching)
The stitching position is about 6 mm/0.24 inch from the
leading edge of the paper, and cannot be changed
vertically.
The stitching position along the width of the paper is the
same as saddle stitching.
