72
12. STITCHER HEAD
Wire measuring #27 (0.4 mm/0.02 inch) to #25 (0.5 mm/0.02 inch) in diameter can be used. The #25 (0.5 mm/0.02 inch)
provides the best performance.
12-2. Wire
No.
Name
Function
1
Wire guide spring
Feeds wire to the stitching section.
2
Wire guide
Guides the wire.
3
Wire feed detection unit
Detects wire feed amount and prevents stitching error.
4
Felt disks
Cleans the wire surface and applies a small amount of oil.
5
Wire return lock
Prevents the wire supplied from returning.
6
Release disk
When lowered, releases the wire return lock.
7
Fixing knob
Fixes the wire guide spring to the wire tube.
8
Wire tube upper
Wire path
9
Stitch length adjustment knob
Wire is cut short when rotated clockwise, and long when rotated counterclockwise.
bk
Triangular handle
For switching whether to stitch or not
bl
Feed wheels
Grip the wire when the triangular handle is set to the stitching position. When rotated,
with the adjusting handle, wire is fed.
bm
Wire tube lower
Wire path
bn
Mounting bolt
Secures the stitcher head to the mounting block.
bo
Balance adjustment wheel
When rotated, adjusts the left and right leg length of a stitch.
bp
Wire straightener
Straightens the wire.
bq
Leaf spring
Holds the former.
br
Former
Cuts the wire and bends it into C shape.
bs
Adjusting handle
Used when feeding wire by hand. (Accessory)
bt
Tenon block
Secures the stitcher head to the mounting block.
