Page 5
Stage One
Marking Floor Channel Locations
1. Find the previously determined location of the back Right Corner of the room.
Mark that location on the home at the deck level.
Get the length of the Right Side Wall from the Project Planner in your Installation Package. Mark this
dimension on the deck with a chalk line.
Helpful Hint: Use the 3’ x 4’ x 5’ triangle method to make sure your wall is at a right angle to the home. See
Drawing.
2. Determine the location of the back Left Corner of the room. (Use the Front Wall Length given in your
Project Planner as a guide.) Mark the Left Side Wall with a chalk line the same way you marked the Right
Side Wall.
It is important to use the 3’ x 4’ x 5’ triangle method again to be sure your Left Side Wall is at a right angle to
the home.
3. Measure distance between front corners. It must be the same dimension as in your Project Planner. Then
snap a chalk line to mark the Front Wall.
Marking Wall Channel Locations
1. At the Back Right Corner location of the room, use a carpenter’s level and a long straight edge to continue
the line on the deck up the Right side of the home.
2. Refer to your Project Planner for the Mounting Rail height provided when this order was placed. Otherwise
refer to the Mounting Rail Height Chart in the Roof Installation Instruction Book. Then mark the point where
bottom edge of the Mounting Rail will be located. See Drawing at top of Page 6.
3. Move to the Back Left Corner of the room and repeat process used in Step 1 of Marking Wall Channel
Locations.
Summary of Contents for Deluxe Three -Season Sunroom
Page 4: ...Page 3 Room Assembly...
