Berkshire Potting Bench
4
Insert one 51½" table rail (part 5) into 38" front right post (part 4). Insert one 51½" shelf rail (part 6) into 38"
front right post. Insert free ends of table and shelf rail into 38" back left post (part 3). Using four ¾" screws
per post, screw together potting bench front panel. Be sure all parts are fully inserted into posts before
securing. Using included super glue tube, glue 4" sq. flat post cap (part 19) onto top of each post.
Lay out four 43" table top rails (part 15) with pilot holes facing up. Set each 22" table top brace (part 13)
over pilot holes of table top rails. Using eight 1¼" screws per table top brace, fasten table top braces to table
top rails. Apply glue to inside edges of 22" table top end cap (part 17). Press end cap onto ends of table top
(DO NOT slide from end). Take care that end cap is flush with ends of table top and use a file to round off any
sharp edges.
