background image

IB-CD109(AD)-WM-E-121302

PRECAUTIONS

On Safety

•

As the laser beam used in the CD

player section may be harmful to the

eyes, do not attempt to disassemble

the cabinet. Refer servicing to

qualified personnel only.

•

Should any solid object or liquid fall

into the player, unplug the player, and

have it checked by qualified personnel

before operating it any further.

On Power Sources

•

For battery operation, use 6 size “C”

batteries. We recommend alkaline

batteries for longer life.

•

When the batteries will not be used

for a few weeks or more, remove them

to avoid damage that can be caused

by battery leakage or corrosion.

11

On Operation

•

If the player is brought directly from a

cold to a warm location, or is placed

in a very damp room, moisture may

condense on the lens inside the CD

player section. Should this occur, the

player will not operate properly. In

this case, remove the CD and wait

about an hour for the moisture to

evaporate.

On Placement

•

Do not leave the player in a location

near a heat source, or in a place

subject to direct sunlight, excessive

dust or mechanical shock.

•

Do not place the player on an inclined

or unstable place.

•

Do not place anything within 1 inch of

the back of the cabinet. The

ventilation holes must not be covered

for the player to operate properly and

prolong the life of its components.

•

If the player is left in a car parked in

the sun, be sure to choose a location

in the car where the player will not be

subjected to the direct rays of the

sun.

•

Since a strong magnet is used for the

speakers, keep personal credit cards

using magnetic coding or springwound

watches away from the player to

prevent possible damage from the

magnets.

•

This CD player is designed to be

played on a stable no vibration

position. If you bump the set during

CD play, the music will stop or skip for

a few seconds. This is normal for this

type of player.

Summary of Contents for CD-109
















Reviews: