background image

IB-CD1095(SY)-WM-E-031604

PRECAUTIONS

On Safety

As  the  laser  beam  used  in  the  CD
player  section  may  be  harmful  to  the
eyes,  do  not  attempt  to  disassemble
the  cabinet.  Refer  servicing  to
qualified  personnel  only.

Should any solid object or liquid fall
into the player, unplug the player, and
have it checked by qualified personnel
before operating  it  any  further.

On Power Sources

For  battery  operation,  use  6  size 

C

batteries.  We  recommend  alkaline
batteries  for  longer  life.

When  the  batteries  will  not  be  used
for a few weeks or more, remove them
to  avoid  damage  that  can  be  caused
by  battery  leakage  or  corrosion.

11

On Operation

If the player is brought directly from a
cold  to  a  warm  location,  or  is  placed
in  a  very  damp  room,  moisture  may
condense  on  the  lens  inside  the  CD
player  section. Should  this occur,  the
player  will  not  operate  properly.  In
this  case,  remove  the  CD  and  wait
about  an  hour  for  the  moisture  to
evaporate.

On Placement

Do  not  leave  the  player  in  a  location
near  a  heat  source,  or  in  a  place
subject  to  direct  sunlight,  excessive
dust  or  mechanical  shock.

Do not place the player on an inclined
or  unstable  place.

Do not place anything within 1 inch of
the  back  of  the  cabinet.  The
ventilation holes must not be covered
for the player to operate properly and
prolong  the  life  of  its  components.

If  the  player  is  left  in  a  car  parked  in
the sun, be sure to choose a location
in the car where the player will not be
subjected  to  the  direct  rays  of  the
sun.

Since a strong magnet is used for the
speakers,  keep  personal  credit  cards
using magnetic coding or springwound
watches  away  from  the  player  to
prevent  possible  damage  from  the
magnets.

This  CD  player  is  designed  to  be
played on  a  stable  no  vibration
position.  If  you  bump  the  set  during
CD play, the music will stop or skip for
a  few  seconds.  This  is  normal  for  this
type  of  player.

IB-CD1095(sy)-WM-E-031604.p65

3/18/2004, 2:11 PM

12

Summary of Contents for CD-1095

















Reviews: