background image

IB-CD1095(SY)-WM-E-031604

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION
CORD,  RECEPTACLE  OR  OTHER  OUTLET  UNLESS  THE  BLADES  CAN  BE  FULLY
INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

 

1. Read these instructions.

 2. Keep these instructions.
 3. Heed all warnings.
 4. Follow all instructions.
 5. Do not use this apparatus near water.
 6. Clean only with dry cloth.
 7. Do not block any ventilation openings, install in accordance with the manufacturer

s

instructions.

 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

 9. Do not defeat the safety purpose of  the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally or has been dropped.

14. This  appliance  shall  not  be  exposed  to  dripping  or  splashing  water  and  that  no

object filled with liquid such as vases shall be placed on the apparatus.

1

WARNING

IMPORTANT SAFETY INSTRUCTIONS

The  lightning  flash  with

arrowhead symbol, within an

equilateral  triangle,  is

intended  to  alert  the  user  to

the  presence  of  uninsulated

dangerous  voltage

  within

the  product

s  enclosure  that

may  be  of  sufficient

magnitude to constitute a risk

of electric shock to persons.

CAUTION

RISK  OF  ELECTRIC  SHOCK

DO  NOT  OPEN

WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO  NOT  REMOVE  COVER
(OR  BACK).    NO  USER
SERVICEABLE PARTS INSIDE.
REFER  SERVICING  TO
QUALIFIED 

SERVICE

PERSONNEL.

The exclamation point within
an  equilateral    triangle  is
intended to  alert the user to
the  presence  of  important
operating  and  maintenance
(servicing)  instructions  in
the  literature  accompanying
the  appliance.

IB-CD1095(sy)-WM-E-031604.p65

3/18/2004, 2:11 PM

2

Summary of Contents for CD-1095

















Reviews: