background image

IB-CD2036(SY)-WM-E-010805

 

1. Read  these  instructions.

 2. Keep  these  instructions.
 3. Heed  all  warnings.
 4. Follow  all  instructions.
 5. Do  not  use  this  apparatus  near  water.
 6. Clean  only with  dry  cloth.
 7. Do not block any ventilation openings, install in accordance with the manufacturer

s

instructions.

 8. Do  not install  near  any heat  sources  such  as radiators,  heat  registers, stoves,  or

other  apparatus  (including  amplifiers)  that  produce  heat.

 9. Do  not  defeat  the  safety  purpose  of    the  polarized  or  grounding-type  plug.  A

polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided  for  your  safety.  If  the  provided plug  does  not  fit  into  your  outlet,  consult
an  electrician  for  replacement  of  the  obsolete  outlet.

10.Protect  the  power  cord  from  being  walked  on  or  pinched  particularly  at  plugs,

convenience  receptacles,  and  the  point  where  they  exit  from  the  apparatus.

11. Only  use  attachments/accessories  specified  by  the  manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13.Refer  all  servicing  to  qualified  service  personnel.  Servicing  is  required  when  the

apparatus  has  been  damaged  in  any  way,  such  as  power-supply  cord  or  plug  is
damaged,  liquid  has  been  spilled  or  objects  have  fallen  into  the  apparatus,  the
apparatus  has  been  exposed  to  rain  or  moisture,  does  not  operate  normally  or
has  been  dropped.

14.This  appliance  shall  not  be  exposed  to  dripping  or  splashing  water  and  that  no

object  filled  with  liquid  such  as vases  shall  be  placed  on  the  apparatus.

1

WARNING

IMPORTANT  SAFETY  INSTRUCTIONS

The  lightning  flash  with

arrowhead  symbol,  within  an

equilateral triangle, is intended

to  alert  the  user  to  the

presence  of  uninsulated

dangerous voltage

 within the

product

s  enclosure  that  may

be  of  sufficient  magnitude  to

constitute  a  risk  of  electric

shock  to  persons.

CAUTION

RISK  OF  ELECTRIC  SHOCK

DO  NOT  OPEN

WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO  NO T  REMOVE  COVER
(O R  BACK).    NO  USER
SERVICEABLE PARTS INSIDE.
REFER  SERVICING   TO
Q UALIFIED 

SERVICE

PERSONNEL.

The exclamation point within
an  equilateral    triangle  is
intended  to    alert  the  user
to the presence of important
operating  and  maintenance
(servicing) instructions in the
literature  accompanying  the
appliance.

SEE BOTTOM OF THE SET

TO  PREVENT  FIRE  OR  SHOCK  HAZARD,  DO  NOT  USE  THE  PLUG  WITH  AN
EXTENSION  CORD,  RECEPTACLE  OR  OTHER  OUTLET  UNLESS  THE  BLADES
CAN  BE  FULLY  INSERTED  TO  PREVENT  BLADE  EXPOSURE.  TO  REDUCE  THE
RISK  OF  FIRE  OR  ELECTRIC  SHOCK,  DO  NOT  EXPOSE  THIS  APPLIANCE  TO
RAIN  OR  MOISTURE.  TO  PREVENT  ELECTRICAL  SHOCK,  MATCH  WIDE  BLADE
PLUG  TO  WIDE  SLOT,  FULLY  INSERT.

IB-CD2036(SY)-WM-E-010805.PMD

2/23/2005, 2:38 PM

2

Summary of Contents for CD-2036



















Reviews: