IB-PH5435-WC-E-032805
Calling back from the Caller ID List
CALLER ID FEATURES
As the phone keeps the data of up to 70 calls, if the 71st call comes
in, the phone will delete the oldest data automatically.
To prevent important call from being deleted, you can store them
into the 13 speed dial memories (3 one-touch and 10 two-touch).
The phone number is now stored in that memory button (Note:
Only the number will be stored, not the name).
1. Display the phone number you want to call back using the UP
or DOWN button.
2. Press the CALLBACK/ADJUST button.
3. If the number is only 7-digit (local call), the display will show
“
PICK UP OR ADJ
”
and the phone displayed is 7-digit; if you want
the phone number to be 10-digit or 11-digit, press the
CALLBACK/ADJUST button once or twice more.
4. If the phone number is 10-digit, the display will show
“
PICK UP
OR ADJ
”
and the phone number displayed is 11-digit (
“
1
”
is added
automatically in front of the 10-digit phone number); if you want
the phone number to be 10-digit or 7-digit, press the
CALLBACK/ADJUST button once or twice more.
5. Pick up the handset, the displayed number will dial out
automatically.
B. When Handset is Picked Up
A. When Handset is on the Base
Storing Phone Numbers from the Caller
ID List
1.
Display the phone number you want to store.
2. Press the STORE button. The number is repeated in the
display.
3.
For one-touch memory
Press a one-touch speed
dial button (M1 to M3).
Press the
AUTO
button, and then
any speed dial memories (0 to 9).
11
1. Display the phone number you want to call back using the UP
or DOWN button.
2. Press the CALLBACK/ADJUST button.
3. If the number is only 7-digit (local call), the display will show
“
DIALING OR ADJ
”
and the phone displayed is 7-digit; if you want
the phone number to be 10-digit or 11-digit, press the
CALLBACK/ADJUST button once or twice more, the displayed
phone number will dial out automatically .
4. If the phone number is 10-digit, the display will show
“
DIALING
OR ADJ
”
and the phone number displayed is 11-digit (
“
1
”
is added
automatically in front of the 10-digit phone number); if you want
the phone number to be 10-digit or 7-digit, press the
CALLBACK/ADJUST button once or twice more; then after 2
seconds, the displayed phone number will dial out automatically.
For two-touch memory
IB-PH5435-WC-E-032805.pmd
4/1/2005, 12:28 PM
13
