iv
WARNING: Heated surface
Ensure at least 2” (5 cm) air space is maintained on all
sides of the Duracell
®
Powerpack Pro. During operation,
keep away from materials that may be affected by high
temperatures such as blankets, pillows and sleeping bags.
WARNING: Fire hazard
Jump-start cable clamps must be connected positive
to positive (red clamp to battery “+”) and negative to
negative (black clamp to battery “–”). A reverse polarity
connection (positive to negative) may cause damage to
the unit and/or create a sparking/explosion hazard.
WARNING: Fire hazard
Never allow jump-start cables’ red and black clamps to
touch each other or another common metal conductor.
This could cause damage to the unit and/or create a
sparking/explosion hazard. Always store the clamps
in the appropriate holder on each side ofthe Duracell
®
Powerpack Pro after use.
WARNING: Medical equipment
This product is NOT tested, designed nor intended to
be used with life support systems or any other medical
devices.
WARNING: Fire hazard
The jump-start feature is designed for short term
operation only—less than 4 seconds. Operating the
jump-start feature for more than 4 seconds may cause
damage to the unit. Allow the Duracell
®
Powerpack Pro to
cool down for at least 3 minutes after each jumpstart.
WARNING: Proper application
Do not use the appliance for any application except that
for which it is intended.
.
Summary of Contents for Powerpack 300
Page 2: ...ii ...
