21
DE
• Silber wird auf der rechten Seite angezeigt und je größer das Objekt, desto
weiter rechts wird es angezeigt.
• Die Tiefenanzeige für münzgroße Objekte ist sehr genau, wobei größere,
unregelmäßig geformte Objekte in der Ablesung variieren können. In
diesem Fall kann das wiederholte Überfahren desselben Bereichs zu
besseren Messergebnissen führen. Wenn die Tiefenanzeige immer noch
variiert, kann es sein, dass mehr als ein Objekt erkannt wird.
• Wie bereits erwähnt, zeigt der Detektor in unbekannten Gebieten
je nach Bodenart und Zusammensetzung der gefundenen Objekte
unterschiedliche Ergebnisse. Bestimmte Arten von Metallen müssen unter
Umständen eliminiert werden, um gewünschte Metalle nicht zu verpassen.
(9) Die Verwendung des Non-Motion-Modus
Dies ist die reaktionsschnellste Art der Erkennung. In stark mineralisierten
Böden oder an engen Stellen kann der PINPOINT-Modus die beste Wahl
für die Erkennung von Objekten sein. Bewegen Sie die Suchspule im
PINPOINT-Modus langsam.
FEHLERSUCHE UND FEHLERBEHEBUNG
Problem
Mögliche Ursache und Lösungsansatz
Gerät geht nicht an, es
ertönt kein Start-Signal
oder das Display zeigt
nichts an.
Versichern Sie sich, dass die Batterien korrekt
eingesetzt wurden.
Überprüfen Sie, ob der Batteriefach-Deckel
richtig sitzt.
Ersetzen Sie die Batterien.
Das Display zeigt etwas,
reagiert aber nicht.
Die Selbstdiagnose hat nicht funktioniert.
Schalten Sie das Gerät aus und starten Sie es
dann erneut.
Der Ton ist unregelmäßig
und die Zielanzeige
schwankt.
Benutzen Sie das Gerät nicht in Innenräumen,
hier gibt es zu viele Interferenzen.
Halten Sie das Gerät fern von Stromleitungen,
Kabeln und Elektrozäunen oder reduzieren Sie
die Empfindlichkeit.
Summary of Contents for 10032724
Page 1: ...10032724 Metalldetektor Metal Detector Detector de metales D tecteur de m taux Metal detector...
Page 2: ......
Page 103: ......
Page 104: ......