About barcode scanner - Symbology settings
12
3.
Touch
Internal Scanner
>
Default Profile
.
4.
Select Device, Symbology Configuration, Decode
Preference, or Notification Settings
5.
Modify the settings to meet your application needs.
Symbology settings
Use the
Symbology Configuration
to enable and disable bar
code symbologies. Touch a symbology to view and modify the
symbology configuration parameters.
Advance settings
Use the
Advance settings
to view and modify much more
configuration about each symbology’s parameters
Decode timeout
Use the
Decode Timeout
to setup the time of scanning,
whatever scanner received a bar code. The scanner
component will stop works after that time. Default option is 1
second.
Decode time limit
Use this setting to configure how the scan buttons work.
Scanning automatically turns off after this number of
seconds if the scan trigger is pressed and nothing has
successfully decoded. Default is 800ms.
Prefix
Defines the string added before the decoded bar code data.
Substitutions occur within the Prefix string values as follow:
\r is replaced by 13
\n is replaced by 10
\t is replaced by 9
\\ is replaced by ‘\’
