2
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future
reference.
Important safety information. Read the instructions carefully.
High voltage. Danger.
Ground.
Double Insulation (Class II safety equipment).
Fuse must be replaced as per the specification herein.
!
200mA/250V
• When using electrical appliances basic safety precautions should always
be followed.
• The instrument can only be used in conjunction with the probe, for the
compliance with safety standards. If the probe needs replacing due
to damage, the replacement must be of the same type or of the same
electrical specifications.
•
Do not exceed the input limits specified for each range.
• When the instrument is measuring, do not touch the input terminal not in
use.
• When a measurement range is uncertain, turn the function/range switch to
the maximum range position.
• Before turning the function/range switch, make sure the probe is open with
the circuit being measured.
• Before on-line resistance measurement of voltage higher than 60V
DC/30V AC, remember to keep your fingers behind the hand shield of the
probe.
• When measuring a TV set or switch power supply, watch for pulse in the
circuit that may damage the multimeter.
• Before measuring any transistor, make sure the probe is not connected to
any circuit being measured.
• Before taking the measurement of voltage with the probe, make sure there
is no electronic element connected to the test socket of the transistor.
• One Instruction manual
• One pair of probes
• One package
• One 9V battery NEDA 1604 6F22
• One K Thermocouple sensor (MAS838 only)
• Rubber case (optional extra)
WHAT’S INCLUDED
