5
In insulation test mode, it indicates the measure value overflow.
Unsafe voltage warning. Indicates greater than 20V.
Continuity test function is selected.
Auto power off function is selected.
Insulation test indicator.
Source voltage rating for insulation test.
Timer unit.
Measure unit.
Display the Max, Min and Average value.
DISPLAY MESSAGES
Indicator
Description
batt
Appears on primary display, indicating the battery is too low for
reliable operation. Replace the battery.
bat
Appears on auxiliary display, indicating that the battery is too low to
perform the insulation test.
P r E S
Preset value.
POFF
Auto power off function is disabled.
LIVE
In insulation mode, it indicates that the Meter has detected the
voltage on the input terminals.
DISC
In insulation mode, it indicates that the Meter peforms the auto
discharge function. Do not touch any input terminals in this mode.
SAVE
Store measuring data.
dEL n:
Delete the selected data.
dEL ALL
Delete all memorised data.
COMP Hi
The upper limited value.
COMP Lo
The lower limited value.
- - - - COMP The limited value is invalid.
Beep function disabled.
BUTTONS
