3
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future
reference.
•
When using electrical appliances basic safety precautions should always be
followed.
•
Do not operate the meter if the test leads are damaged in any way. Damaged
leads should be replaced.
•
Do not exceed the input
limits shown in the table
(right).
•
To avoid damage to the
meter do not apply more
than 500V between
any terminal and earth
ground.
•
Disconnect the test leads
from the circuit under
test before changing test
ranges.
•
Use caution when working above 60V DC or 25V AC rms, as such voltages pose a
shock hazard.
•
This meter is designed for indoor use only.
•
Replace the battery as soon as the low battery indicator appears.
•
Turn the meter off when it is not in use and remove the battery when not in use for
a long period of time.
•
Do not store the meter in a place of direct sunlight, high temperature or high
humidity.
Function Range Input Terminals Maximum Input
DCV 2~600V
VΩ COM
600V DC
ACV 2~600V
OHM
VΩ COM
250V DC/AC
Diode
DCA 200mA
mA COM
200mA DC/AC
ACA 200mA
DCA 10A
10A COM
10A DC/AC
ACA 10A
•
One multimeter
•
One pair of test leads
WHAT’S INCLUDED?
GENERAL SPECIFICATION
•
One multifunction adaptor
•
One user manual
Display
3½ digit LCD
Measurement Rate
2-3/sec
Overrange Indication
“1” will be displayed
Polarity Indication
Automatic negative
Low Battery Indication
“ ” displayed
Overload Protection
Full range
Operating Temperature
0°C to 40°C, 0 to 75% RH
Storage Temperature
-10°C to 50°C, 0 to 75% RH
Battery Type
One 9V battery IEC 6F22, NEDA 1604
Dimensions
176 x 88 x 38mm (L x W x H)
Weight
310g (including battery)
+ -
