www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
www.mcmelectronics.com
Page <2>
V1.0
21/06/17
Magnifying Lamp
Important Notice :
This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
DURATOOL is the registered trademark of the Group. © Premier Farnell Limited 2016.
Part Number Table
Description
Part Number
Magnifying Lamp
DT000090
• Check the lamp for damage from time to time. Don’t touch the device if the lamp or the mains adaptors show any signs of
damage. Please switch off the appropriate mains socket and then carefully pull the mains plug from the socket then take it
to a specialist workshop.
Maintenance
•
Remove loose particles with clean compressed air and then brush off remaining residues with a soft fine brush.
•
Clean the surface with a lens cleaning cloth or a clean, soft and lint-free cloth. To remove fingerprints and other fat residues,
the cloth can be moistened with water or lens cleaning solution.
• Do not use acid, alcohol or other solvents or rough, fuzzy cloths. Avoid excessive cleaning and extorting too much pressure.
•
Never touch the lens with your fingernails or other sharp objects.