10
10
9
ASSEMBLING THE TIMBER FRAME
10
• Position the Top Plate Packer on the top of the framing,
flush with the front. This provides the slope for the roof.
• Nail to the top plate using 75mm nails - 1 at each end
and 4 evenly spaced.
• Take the centre Roof Beam and position over the 2 end
wall studs and attach using 2 x 75mm nails at each
end.
• Select the Roof Beam Angle Braces and screw them
under the centre roof beam and onto the centre end
wall stud as shown using 4 x 40mm screws.
Centre Roof Beam
Top Plate Packer
