FMH Conveyors
®
Operator’s Manual
NestaFlex 376PL Conveyors
5 |
P A G E
EFFECTIVE JUNE 2017 PART # 016842 ©2016 FMH CONVEYORS LLC
PRODUCT SPECIFICATIONS
Conveyor Bed Width:
18, 24, 30, or 36 inches
Load Capacity:
376 lbs (171 kg) per linear foot.
Skate Wheels:
Steel or Polymer Material. 1‐15/16 inch diameter.
Shafts:
5/16 inch (7.9 mm) diameter rod.
Axle Spacing:
3 inches center to center first 10’ of conveyor; then 5‐1/4 inches
center to center. Axle spacing will vary as needed for specific
applications.
Conveyor Height:
Infeed and discharge heights are fixed with an application specific per
foot pitch in the extended position. Height and pitch will vary as
needed for specific applications.
Side Link Construction:
The side links are made of 1 1/4 inch wide steel. Side links are
assembled with nuts and screws.
Casters:
6 x 2 inch casters are used for easy mobility and end sections have
swivel, locking casters. 8 x 2 inch casters are used for long conveyors.
Supports:
Square 1‐1/4 inch steel tube perpendicular legs joined by two welded
cross braces. Perpendicular legs are designed to support a pitched
conveyor and remain perpendicular to a level floor in the contracted
and extended positions
Carton Stop:
Heavy duty roller carton stop.
Transition Stop:
Steel transition stop located on the infeed (high) end.
Transition:
Herringbone (centering) steel roller conveyor attached to a
transitioning shoe with steel rollers.
Guide Track:
Continuous steel guide track with centering nose at the front, a
reinforced back stop at the end, and supports anchored to the floor.
Options:
See page 20.
