Rev.4
16
LOW ROLL ALARM MENU
This screen will pop up if the (Optional) Low Roll sensor turns on.
If this screen appears, the machine will drop out of Automatic Mode and will not run until the roll of film is
replaced and the Roll Sensor turns off.
Pressing the SQUARE Button will override the low sensor and allow the machine to continue running until
the roll is empty.
DOUBLE DUMP ALARM MENU
If a Double Dump Condition is detected (overfilled bag) the machine will stop and drop out of Auto Mode.
This screen appears to indicate the alarm condition.
This alarm must be cleared in order to resume bagging, to clear the alarm the machine must be placed in the
Hand Mode and the overfilled bag must be jogged forward.
The alarm can also be reset by pressing the F3 button.
Summary of Contents for Hamer 540
