DuraVent SELKIRK ULTRA-TEMP, Manual

4

Ultra-Temp

®

Typical Installations 

continued

NOTE ON CHIMNEY/STOVE PIPE CONNECTIONS 

These diagrams show Ultra-Temp/Galva-Temp Chimney Systems connected to Selkirk DSP Double-Wall Stove Pipe using 

the Chimney Pipe Adapter. Ultra-Temp/Galva-Temp Chimneys may be connected to Single-Wall Stove Pipe using either 

DSA, DSAC or CPA. For additional information on Model DSP Double-Wall Stove Pipe go to www.selkirkcorp.com.

6.  Wood Heater with its 

chimney through an 

upstairs enclosure

7.  Pitched Roof with Attic

8.  A-Frame with chimney on a steep 

pitch roof

Round Top (T-CT)

Storm Collar (T-SC)

Flashing (T-TF)

Chimney Pipe

Locking Bands

at All Joints

Finish Support

(T-FSP) Package

Single Wall

Pipe Elbow or

Cleanout Tee

Combined Venting

of Oil or Gas

Appliances

Furnace

Water

Heater

Correct Clearance

for

Type of Appliances

Construct a 

Full Enclosure in

Occupied or

Habitable Areas

3 Foot

Minimum

5.  Combination of Furnace and  

Water Heater on one chimney

4.  Solid Fuel Appliance with a 

short vertical chimney

Attic 

Insulation

Chimney Pipe

Adapter (CPA)

Solid Fuel

Appliance

Round Top (T-CT)

Storm Collar (T-SC)

Flashing

(T-AF6) or

(T-AF12)

Attic Insulation

Shield (T-AIS)

Finish Support Pkg. (T-FSP)

DSP Stove

Pipe

Joist Shield

(T-JS)

Flashing

(T-AF6) or

(T-AF12)

Either

Full Enclosure in Attic or

Attic Insulation Shield

Round Top (T-CT)

Storm Collar (T-SC)

Full Enclosure in

Occupied Areas, Storage

Areas or Closets

Locking Bands at

All Joints

Finish Support Pkg.
(T-FSP)

All Connections

Secured with Screws

Solid

Fuel

Appliance

Chimney Pipe 

Adapter (CPA)

DSP Stove

Pipe

Locking Band

2 Foot

Minimum

All Connectors

Secured with Screws

Round Top (T-CT) 

DSP Stove Pipe

Roof Brace Kit

(T-RBK) 

Selkirk

Type HT Chimney

Pipe

Storm Collar

(T-SC)

High Pitch

Flashing

(T-AF)

Roof Support (T-RSP)*

Under Flashing

Adjustable Pitched Ceiling Plate (T-PCPAJ)

Used to Trim Opening

Suspended Length, Long Enough to 

Provide Required Clearance, Secured

with Locking Band or Screws

* Support Box may also be used. Please consult 

  installation instructions for more information.

Chimney Pipe Adapter (CPA)

Finishing Collar (T-FC)

Round Top (T-CT) 

Selkirk

Type HT Chimney

Attic Level

24" Maximum

Support

Box (T-SB)*

Ceiling

The Support Box may be

installed flush with the ceiling

level. The Support Bucket must

be exposed a minimum of 

3-1/2" below the ceiling level.

Single Wall Smoke Pipe 

* Support Box also intended for use in

  mobile home and A-frame installations.

Storm Collar

(T-SC)

Locking Band

Flashing

(T-TF, T-AF6 or

T-AF12)

Shield

Trim

Support Bucket

Stove Pipe Adapter

(DSAC)