en
Important information
Mounting instructions information
These mounting instructions come as part of the Duravit
whirltub and should be read carefully prior to installation.
Explanation of the key words and symbols
DANgEr
Indicates a hazardous situation which,
if not avoided, will result in death or
serious injury.
NotIcE
Is used to address practices not related
to physical injury.
Link to the
Electrical installation
section
Link to the
mounting information
in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and leak-tightness
Indication of the temperature
target readership and qualifications
The whirltub must only be installed by trained plumbing
engineers. The electrical installation should only be carried
out by qualified electricians.
NotIcE
risk of product and/or property
damage!
> Observe the local installation regulations and any
country-specific standards at all times.
Safety instructions
DANgEr
risk of fatal electric shock!
> Do NOT remove any whirltub components.
Mounting instructions
Please read pre-installation information sheets prior to
the installation. These are available to download on the
Internet at www.duravit.com.
19
checking the whirl system (Diagram 19)
> Switch on the whirl system for 10 minutes:
run this through once completely in the case of
circuits with different levels of intensity.
> Leave the water in the whirltub and wait
10 minutes.
> Check to make sure that it is leak-tight.
> If adjustments are required, repeat the check.
6
WH_M_Cape Cod_corner_b2w/15.11.2
Summary of Contents for 2nd floor 760074
Page 1: ...Vorinstallationsdatenblatt Bade und Whirlwannen Leben im Bad Living bathrooms...
Page 10: ...Datenbl tter der Bade und Whirlwannen Vorinstallationsdatenbl tter 11...
Page 17: ...2 WH_M_DuraSolid_FST 17 03 4 Cape Cod 7X0330 DuraSquare 7X0430 Luv 7X0434...
Page 25: ...2 WH_M_Cape Cod_corner_b2w 15 11 2 7X0362 7X0363 7X0364...
