20
>
Drain the water and rinse the tub.
>
Fill the tub with water again.
>
Switch on the jet nozzles for 5 minutes.
>
Drain the water.
>
Repeat the process as necessary.
6.2 Sanitary-grade acrylic
cleaning
> Clean acrylic with a soft damp cloth.
> Use the Duravit Acrylic Surface Maintenance Set (Art. no. # 790301 00 0 00 0000) for
the occasional thorough cleaning and for removing stubborn spots.
> Remove extensive soiling with warm water and a liquid detergent, dish washing
liquid or soap suds. Do not use anything abrasive as this will cause damage.
Damage
> Remove scratches and other surface damage with the Duravit Acrylic Surface Main-
tenance and Repair Set (Art. No. # 790302 00 0 00 0000).
6.3 controls
> Clean the controls with a soft damp cloth.
6.4 cable-driven waste and overflow
> Clean the cable-driven waste and overflow with a soft damp cloth.
7. Disposal
Dispose of the packaging in an environmentally-friendly manner.
The whirltub must be disposed of in an orderly, environmentally-friendly manner ac-
cording the standard regulations that apply in your local area. Electronic components
must be recycled. Please consult the recycling point in your area.
