39
•
HPL (High pressure laminates)
How often should the water be treated?
How often you will need to treat the water is dependent on a collection of different
factors such as location of the system, number of bathers, bathing frequency, water
temperature, soiling due to leaves, pollen, insects, etc. Thus, you will need to deter-
mine the optimal rhythm and check this when
any
of the above factors change.
> To start with, carry out steps 7 every 3-5 days. After one to two months you should
have found your optimal rhythm.
> Carry out thorough cleaning of the pool at least three to four times per year. Always
clean the pool when it is emptied and refilled or if the water becomes cloudy due to
your disinfection measures and the pH value cannot be set within the recommended
limits.
How should the water be treated?
NOTICE
•
Do not add water care products simultaneously, add each care product one at a
time.
> Add the water care products.
> Activate all whirl circuits for 2-3 minutes to mix the water thoroughly.
11.2 Regulate pH value
NOTICE
•
After the pool is filled afresh the pH value will rise rapidly during the first days.
Check and set the pH value only in small steps (max. frequently by 0.3 in every
step). An excessive lowering of the pH value in one step also lowers the alkalinity.
This effect can be reduced by regulation at a lower pH value.
•
Do not regulate the pH value with hydrochloric acid.
•
If you would like to bathe during this time, perform a check and regulate the pH
value after bathing!
Summary of Contents for Pool
Page 1: ...3 Pool Leben im Bad Living bathrooms Bedienungsanleitung Operating Instructions ...
Page 2: ......
Page 51: ...51 ...
