Brake Light Camera for Durite CCTV 12
volt
Part 0-099-1
6
Fits: Ford
Custom
20
1
8
-20
20
0-099-1
6
-LEAF
www.durite.co.uk
WARNINGS
Before using this unit please read these instructions carefully. Take special care to follow
the warn-ings and safety suggestions listed below. Keep these instructions for future refer-
ence.
There are no user-serviceable parts within the unit, refer servicing to qualified service
personnel.
PRECAUTIONS
• Please ensure you are familiar and comply with local traffic and driving regulations.
• Connection - The camera should only be connected to a Durite cctv system.
• Heat - Do not install the camera near heat sources.
• Mounting - Ensure the camera is facing the desired direction before fixing the camera
base. If fixing to isolated return chassis the camera bracket should be isolated from the
vehicle chassis.
• Service - The user should not attempt to service these units beyond that described in these
instruc-tions. All other servicing should be referred to an authorised service technician.
GENERAL
The camera has a CCD image sensor which gives a high quality picture and its solid state
circuitry provides extremely long life. Compact size and single connection make it easy to
install. Automatic gain control (AGC) provides a clear image in both strong sunlight and
low light conditions, if lighting conditions fall below a set level the Infra-red LEDs will
illumi-nate. It is recommended that all camera lead connections are additionally sealed by
either wrapping with a suitable tape or application of heat shrink sleeving. It is recommend
to
connect the system and test before fixing to ensure the correct field of view is displayed.
IMAGE VIEWING NORMAL vs. MIRROR
The default image is set to MIRROR Image Mode for reversing.
To change to NORMAL Image please refer to guidelines in your CCTV
Manual in the 'Monitor Control' section.
