0-524-74-LEAF
www.durite.co.uk
Read the lowest value. If it is higher than 12.80V,(for 24V
system, the voltage is over 25.60V), the system is running
normally. Press <ESC> to return. There are some problems in
the system if the value is lower than 12.80V,(for 24V system,
the voltage is under 25.60V), please check if the engine belt
is damaged and the suporting wires for a short circuit.
Charging system test
Please turn off the engine before testing.
Connect the red
clamp to the positive polar , and the black to the negative.
Make sure all connections are well contacted in order to
avoid a false result. Press <UP ARROW> <DOWN ARROW>to
select charging system test as the picture below:
After getting access to the below screen please start engine:
After operating, press <ENTER> to display the maximum
load system test screen as the picture below. The current test
voltage is 13.88V, standard maximum voltage is 15.00V(for
24V system, standard maximum voltage is 30.00V), tested
maximum voltage is 14.10V. The other value indicates the
current test voltage is 13.88V, standard minimum voltage
is 13.30V(for 24V system, standard minimum voltage is
26.60V), tested minimum voltage is 13.58V.
