0-649-35-LEAF
www.durite.co.uk
PRODUCT LAYOUT
VOLTAGE DETECTION
What is the lowest and highest voltage to be detected by the jump pack to know it is
operating a 12v system?
There are some voltage ranges for 12V system : 0<3V<8.1V<12V<13.5V.
0--3V: When the car battery is in this range the Jump pack will not react .
3V-8.1V: The 12V Led light will flash, meaning the vehicle battery is weak, the jump pack
will need manual operation by pressing the 12V button when the 12v system cannot be
automatically recognized.
8.1V--12V: In this range the 12V system can automatically recognize the 12V battery, it will
automatically begin to work and output current.
12V--13.5V: In this range the vehicle battery has enough power to start the engine, in this
situation the 12V led will be on but no output will occur.
What is the lowest and highest voltage to be detected by the jump pack to know it is
operating a 24v system?
There are some voltage ranges for 24V system : 13.5V<14.4V<16.2V<24V
13.5V--14.4V: The 12V and 24V led will flash and alternate. No output will be offered, you
need to manually operate and press the 24V button to engage the jump pack.
14.4V--16.2V: 24V led will flash, no output will occur, the jump pack will need manual
operation by pressing the 24V button to engage the jump pack.
16.2V--24V: 24V led will be on and the 24V system can automatically recognize the 24V
battery , will begin to work immediately.
24V: In this range the vehicle battery has enough power enough to start the engine, in this
situation the 24V led will be on but no output will occur.
