Storage Level Indicators
Press the switch to check the battery level of Jump Starter.
The indicator will flash one by one during the period of charging. Different num
-
bers of solid indicators show different storage level of Jump Starter. All indicators
lights turn off when the charging is completed and the units battery is full.
Charging the Jump Starter
:
1. Plug the domestic charger into the 240v socket (or in car charger to 12v socket).
2. Connect the other end of the charger to 15V 1A input port of Jump Starter.
3. Remove from charge once LED status lights turn off or after 8 hours (max.)
Jump Start Vehicle Instructions:
1. Make sure the unit has more than 3 light indictators available before attempt-
ing to jump start the vehicle.
2. Connect the RED clamp to the vehicle’s battery po) terminal and con-
nect the BLACK clamp to the vehicle’s battery negative(-) terminal.
3. The product will automatically identify the 12v/24v voltage via its unique intelli-
gent identifcation function.
4. Start the vehicle.
5. When the vehicle is started remove the jumper cables from the vehicle’s bat-
tery.
6. Leave the vehicle engine running.
0-649-35-LEAF
www.durite.co.uk
OPERATION GUIDANCE
Switch Instruction:
Switch #1 (TEST) Check the batterys storage level and turns the product on.
Switch #2 (12/24V) Selects required voltage. Press 12V for 12V vehicles. Press 24V
for 24V vehicles.
