7" Mirror Monitor Kit
Part 0-775-47
0-775-47-LEAF
www.durite.co.uk
Before using this unit please read these instructions carefully. Take special care to follow
the warnings indicated on the unit itself as well as the safety suggestions listed below.
Keep these instructions for future reference.
PRECAUTIONS
*Power Source
-The monitor should be connected to a 12 - 24 volt de power
supply only.
*Water and Moisture
-Do not use the monitor where it may be subject to water
ingress or excessive moisture. Do not use outside the vehicle unprotected.
*Heat
-Do not install the monitor or camera near a direct heat sources.
*Ventilation
-The monitor should be situated to allow free circulation of air.
*Foreign Material
-Care should be taken so that objects do not fall onto or into,
and that liquids are not spilled on the monitor.
*Mounting Surface
-The monitor should be mounted to a strong secure surface.
*Replacement Parts
- Use only manufacturers replacement specified parts. Unau
-
thorised substitutions may result in fire risk, electric shock or other hazards and
will void the warranty.
*Service
-The user should not attempt to service this units beyond that described
in the operating instructions. There are no user-serviceable parts within the unit.
*Isolation
-When fitting to an isolated earth vehicle the camera and monitor
bracket must also be electrically isolated from the vehicle chassis. If interference
is experienced on earthed chassis vehicles electrically isolating the camera from
the chassis should eliminate the interference.
*Screen Protective Film
- Remove the LCD screen protective plastic cover before
use.
