Programming
50
Operating Instructions 512/532 - 05.0 - 04/2018
4.23 Loading software from a USB stick
When a new software version is available, this can be downloaded
from www.duerkopp-adler.com and loaded into the controller via
a USB stick.
Important
The following files must be stored on the USB stick:
• FUYSTS.BT
• LEEYSTS.BT1
• BT1mot
• BT1PAT
4.23.1 Loading the main program
To load the main program:
1.
Switch on the controller.
2.
Plug in the USB stick.
3.
Press the
USB
button and wait approx. 3 seconds.
4.
Press the
Memory
button.
5.
Use the
+/– Function
buttons to set a value of 5 in the
Fun-
ction
display.
6.
Press the
Select
button.
The download into the controller starts.
Important
The download is finished when no more values are shown in the
Function
display. You must now wait at least
25 seconds
before
continuing, otherwise the controller can be damaged!
7.
Switch off the controller.
8.
Pull out the USB stick.
NOTICE
Property damage may occur!
Interrupting the copy process can damage the machine.
Never pull out the USB during the copy process.
Only pull out the USB after the specified copying time.
Summary of Contents for 512/532
