Working basis
Service manual 567 classic - 01.0 - 10/2015
11
3.3.2 Removing and fitting the arm cover
Fig. 2: Removing and fitting the arm cover
Removing the arm cover
1. Turn the adjusting wheel for the sewing foot stroke (3) to 2.
2. Loosen the screws (1).
3. Hold the arm cover (2) on the adjusting wheel and remove it.
Fitting the arm cover
1. Turn the adjusting wheel for the sewing foot stroke (3) to 2.
2. Fit the arm cover (3).
3. Tighten the screws (1).
(1) - Screws
(2) - Arm cover
(3) - Presser foot stroke adjusting wheel
②
③
①
Summary of Contents for 567 CLASSIC
Page 1: ...567 classic Service manual...
Page 20: ...Working basis 18 Service manual 567 classic 01 0 10 2015...
Page 79: ......