Aligning the needle bar linkage
Service manual 567 classic - 01.0 - 10/2015
33
10 Aligning the needle bar linkage
Order
First check the following setting:
•
A straight and undamaged needle must be inserted
(
Operating manual section, Inserting and replacing the needle
)
Correct setting
Set stitch length adjusting wheel to 0.
The needle pierces exactly in the center of the feed-dog needle hole.
10.1 Moving the needle bar linkage sideways
Cover
•
3.3.2 Removing and fitting the arm cover
•
Head cover (
3.3.3 Removing and fitting the head cover
Fig. 25: Aligning the needle bar linkage sideways
WARNING
Risk of injury.
Crushing injuries from moving parts.
Switch off the sewing machine before aligning the
needle bar linkage sideways.
①
②
③
(1) - Adjusting wheel for the sewing foot
pressure
(2) - Setscrews
(3) - Openings
Summary of Contents for 567 CLASSIC
Page 1: ...567 classic Service manual...
Page 20: ...Working basis 18 Service manual 567 classic 01 0 10 2015...
Page 79: ......