Position of the hook and needle
40
Service manual 567 classic - 01.0 - 10/2015
11.3 Adjusting the needle guard
The needle guard prevents contact between needle and hook tip.
Order
First check the following settings:
•
Loop stroke position (
11.2 Setting the loop stroke position
•
Hook side clearance (
11.1 Setting the hook side clearance
•
Needle bar height (
11.4 Setting the needle bar height
•
A straight and undamaged needle must be inserted
(
Operating manual section, Inserting and replacing the needle
)
Correct setting
Machine locked in place at position 1 (
The needle guard pushes the needle just enough away so that it can-
not be touched by the hook tip.
Cover
•
Feed-dog (
3.3.7 Removing and installing the feed-dog
WARNING
Risk of injury.
Risk of crushing injuries and stab wounds from mov-
ing and sharp parts.
Switch off the sewing machine before checking and
adjusting the needle guard.
ATTENTION
Damage to the machine, needle breakage, or thread damage due to
an incorrect clearance between the needle and hook tip
Check the distance to the hook tip after inserting a new needle with a
different size.
Reset distance if necessary.
Summary of Contents for 567 CLASSIC
Page 1: ...567 classic Service manual...
Page 20: ...Working basis 18 Service manual 567 classic 01 0 10 2015...
Page 79: ......