Sewing feet
50
Service manual 567 classic - 01.0 - 10/2015
Correct setting
The distance between the raised sewing feet and the throat plate is preset
to 20 mm on delivery.
Cover
Arm cover (
3.3.2 Removing and fitting the arm cover
)
Fig. 40: Setting the sewing foot lifting height
Setting steps
1. Loosen the adjusting wheel for the sewing foot pressure:
2. Loosen the setscrews (1).
3. Turn the lever (1) to set the distance between the raised sewing feet
and the throat plate:
•
To raise the sewing feet to a lesser height:
Turn it clockwise
•
To raise the sewing feet higher:
Turn it counterclockwise
4. Tighten the setscrews (1).
(1) - Setscrew
(2) - Lever
①
②
Summary of Contents for 567 CLASSIC
Page 1: ...567 classic Service manual...
Page 20: ...Working basis 18 Service manual 567 classic 01 0 10 2015...
Page 79: ......