Setting the needle thread tension
Service manual 567 classic - 01.0 - 10/2015
51
14 Setting the needle thread tension
14.1 Setting the thread regulator
The thread regulator determines the tension applied to guide the needle
thread around the hook. The required tension depends on the thickness of
the material to be sewn, thread strength, and stitch length.
Lower thread tension for
•
thin material
•
low thread strengths
Greater thread tension for
•
thick material
•
high thread strengths
Correct setting
The loop of the needle thread slides at low tension over the thickest point
of the hook, without forming loops or snagging.
Cover
•
Throat plate slide (
3.3.5 Opening and closing the throat plate slide
Fig. 41: Setting the thread regulator
WARNING
Risk of injury.
Risk of crushing injuries and stab wounds from mov-
ing and sharp parts.
Switch off the sewing machine before checking and
setting the thread regulator.
(1) - Thread regulator
(2) - Screw
①
②
Summary of Contents for 567 CLASSIC
Page 1: ...567 classic Service manual...
Page 20: ...Working basis 18 Service manual 567 classic 01 0 10 2015...
Page 79: ......