Working basis
12
Service manual 567 classic - 01.0 - 10/2015
3.3.3 Removing and fitting the head cover
Fig. 3: Removing and fitting the head cover
Removing the head cover
1. Loosen the screws (1).
2. Remove the head cover (2).
Fitting the head cover
1. Fit the head cover (2).
2. Tighten the screws (1).
3.3.4 Removing and fitting the valve cover
Fig. 4: Removing and fitting the valve cover
Removing the valve cover
1. Undo all four screws (1).
2. Remove the valve cover (2).
Fitting the valve cover
1. Fit the valve cover (2).
2. Tighten all four screws (1).
(1) - Screws
(2) - Head cover
②
①
②
①
(1) - Screws
(2) - Valve cover
Summary of Contents for 567 CLASSIC
Page 1: ...567 classic Service manual...
Page 20: ...Working basis 18 Service manual 567 classic 01 0 10 2015...
Page 79: ......