-20
5.
Every bolt detail fastening status can be tracked by activating those 2 items. If the
tighten statues is outside the setting, it will warn NG whatever the tightening
torque is satisfied.
Rundown Finish Turns:
It monitors how many seconds you fasten this bolt. The range setting is
800~25500 ms.
Rundown Finish Times:
It monitors how many turns you fasten this bolt. The range setting is
2.0~511.9 turns.
MAINTENANCE
Remove the battery pack from this tool before cleaning solutions.
This tool is lubricated before it leaves the factory. This lubrication should
last for the life of the tool. No further lubrication is required.
A battery pulse tool is a precision tool. Disassembly, assembly,
adjustment require exclusive JIGS plus testers, and trained techniques. Incorrect
disassembly, reassembly or adjustment can cause not only insufficient power but also
accidents. Ask for these services from an authorized service centre. The maker or
supplier will not be held liable for any damages caused by factors found to be the
cause of faulty use or repair by users or unauthorized service provider.
CLEANING
With the motor running, blow dirt and dust out of all air vents with dry air at least once
a week. Wear safety glasses when performing this. Exterior plastic parts may be
cleaned a damp cloth and mild detergent. Although these parts are highly solvent
resistant, NEVER use solvent.
WARNING
NOTE
DANGER