background image

-20

20

40

60

80

0

100 F

-30

-40

-10

0

10 20 30

-20

40 C

30

10W-30

ENVIRONMENTAL TEMPERATURE

5W-30

SAE

GENERATOR SETUP (CONTINUED)

Add oil

The generator requires engine oil to operate properly. The generator, when new from the package 
contains no oil in the crankcase

*

. You must add the proper amount of oil before operating the 

generator for the first time. This amount is equal to the oil capacity of the engine crankcase:

WARNING:

 

Do not apply engine oils with additives or 2-stroke gasoline engine oils.

 They don’t 

have enough lubrication, and may shorten the engine’s service life.

a. 

Make sure the generator is on a level surface.

b. 

Unscrew the oil filler/dipstick cap from the engine .

c. 

Using a funnel, add the appropriate amount of oil  

 

into the crankcase. You will know the crankcase is  

 

full when the oil level has reached the lower lip of  

 

the opening you have just poured the oil into.

d. 

Replace oil filler cap.

1.

Step 3 - Adding Oil

Engine oil recommended: SAE 10W-30.

 Viscosity varies with 

regions and temperatures. Choose your oil viscosity using the 

chart to the left.

* A small amount of oil from factory testing may be present on 

arrival.

Model Number

DS4400E

Engine Oil Capacity

20 fl. oz (0.6L)

18

WARNING: DO NOT overfill the crankcase. This 

may damage the motor and shorting overall life 

of your generator.

Summary of Contents for Duro Star DS4400E































































Reviews: