Dürr Technik H2A-160M, Installation And Operationg Instructions

4 

1036100102L02  1904V002 

Important information

2.4  Specialist personnel

Operation

Unit operators must ensure safe and correct 
handling based on their training and knowledge. 

i

Instruct or have every operator instructed in 
the handling of the unit. 

Installation and repairs

i

Always arrange for any assembly work, read-
justments, alterations, extensions, and repairs 
to be performed by Dürr Technik or by per-
sonnel authorised and trained by Dürr Tech-
nik. Qualified personnel are defined as those 
trained by Dürr Technik; who are familiar with 
the unit technology; and are aware of the dan-
gers presented by the unit. 

2.5  Electrical safety

i

Observe and comply with all the relevant elec-
trical safety regulations when working on the 
unit. 

i

Replace any damaged cables or plugs imme-
diately.  

2.6  Only use original parts

i

Only use accessories and special accessories 
that are specified or approved by Dürr Tech-
nik. 

i

Only use original working and spare parts.

Dürr Technik accepts no liability for dam-
age resulting from the use of non-ap-
proved accessories, special accessories 
or any working parts or spare parts other 
than original parts.

2.7  Transportation and storage

The original packaging provides optimum pro-
tection for the unit during transport. 

Dürr Technik will not accept any respon-
sibility or liability for damage occurring 
during transport due to the use of incor-
rect packaging, even where the unit is 
still under guarantee.

– Only transport the unit in its original packag-

ing. 

– Keep the packing materials out of the reach 

of children.  

2  Safety

Dürr Technik has developed and constructed 
the units in such a way that danger is to a large 
extent excluded if the units are used as intend-
ed. Nevertheless, residual risks can remain.  
You should therefore observe the following 
notes. 

2.1  Intended use

The unit is intended for the compression of at-
mospheric air.  
The unit has been designed for operation in dry, 
ventilated rooms. The unit must not be operated 
in a damp or wet environment. Its use in the vi-
cinity of gases or flammable liquids is prohibited.  
Only operate the mobile units in an upright posi-
tion.  

2.2  Improper use

Any other usage or usage beyond this scope is 
deemed to be improper. The manufacturer ac-
cepts no liability for damage resulting from such 
use. In such cases, the user/operator will bear 
the sole risk.

WARNING
Serious injury and material damage 
due to improper usage

i

Conveying explosive mixtures in any 
way other than that specified is not 
permitted.

2.3  General safety information

i

When operating this unit, always observe all 
directives, laws, and other rules and regula-
tions applicable at the site of operation.

i

Check the function and state of the unit prior 
to each use. 

i

Do not convert or modify the unit.  

i

Comply with the specifications of the Installa-
tion and Operating Instructions. 

i

Ensure that the unit operator has access to 
the Installation and Operating Instructions at 
all times.

EN