8
Maintenance
8.1
Maintenance schedule
CAUTION
Burns from hot surfaces
The surfaces of the unit are hot during operation
❯
Allow surfaces to cool down before performing operating or maintenance work.
De-energise the unit prior to working on it or in the event of potential danger (e. g. pull the mains
plug) and prevent it from being switched back on again.
Maintenance interval
Maintenance work
Monthly
❯
Clean the surface of the unit with a non-fuzzing cloth. Keep the ventilation
openings of the crankcase chamber and cylinder head free from dust and
impurities.
Annually
❯
Replace the air intake filter - every six months given a high concentration
of dust.
Every 4 years
❯
Replace the vibration dampers.
Assembly
1035200220L02 1911V002
23
EN
