2
Safety
Dürr Technik has developed and constructed the
units in such a way that danger is to a large
extent excluded if the units are used as intended.
Nevertheless, residual risks can remain. You
should therefore observe the following notes.
2.1
Intended use
Oil-free piston compressors KK
The unit is intended for the compression of atmo-
spheric air. It provides oil-free air for a range of
applications. The unit has been designed for
installation into systems and machines. The unit
has been designed for operation in dry, ventilated
rooms. The unit must not be operated in a damp
or wet environment. When deployed outside, the
unit must be protected against mechanical dam-
age, moisture and excessive soiling by a housing
(e.g. sheet casing). The unit may only be com-
missioned after the manufacturer has ensured
that all requirements requisite to safe operation
have been fulfilled.
Its use in the vicinity of gases or flammable liq-
uids is prohibited.
2.2
Improper use
Any use of this appliance / these appliances
above and beyond that described in the Installa-
tion and Operating Instructions is deemed to be
incorrect usage. The manufacturer cannot be
held liable for any damage resulting from incor-
rect usage. The operator will be held liable and
bears all risks.
WARNING
Serious injury and material damage
due to improper usage
❯
Conveying explosive mixtures in any
way other than that specified is not
permitted.
2.3
General safety information
❯
Always comply with the specifications of all
guidelines, laws, and other rules and regula-
tions applicable at the site of operation for the
operation of this unit.
❯
Check the function and condition of the unit
prior to every use.
❯
Do not convert or modify the unit.
❯
Comply with the specifications of the Installa-
tion and Operating Instructions.
❯
The Installation and Operating Instructions
must be accessible to all operators of the unit
at all times.
2.4
Specialist personnel
Operation
Unit operating personnel must ensure safe and
correct handling based on their training and
knowledge.
❯
Instruct or have every user instructed in han-
dling the unit.
Installation and repairs
❯
Always arrange for any assembly work, read-
justments, alterations, extensions, and repairs
to be performed by Dürr Technik or by person-
nel authorised and trained by Dürr Technik.
Qualified personnel are defined as those
trained by Dürr Technik; who are familiar with
the unit technology; and are aware of the dan-
gers presented by the unit.
2.5
Electrical safety
❯
Observe and comply with all the relevant elec-
trical safety regulations when working on the
unit.
❯
Replace any damaged cables or plugs immedi-
ately.
2.6
Only use original parts
❯
Only use accessories and special accessories
that are specified or approved by Dürr Technik.
❯
Only use original working and spare parts.
Dürr Technik accepts no liability for dam-
age resulting from the use of non-
approved accessories, special acces-
sories or any working parts or spare parts
other than original parts.
2.7
Transportation and storage
The original packaging provides optimum protec-
tion for the unit during transport.
Dürr Technik will not accept any responsi-
bility or liability for damage occurring dur-
ing transport due to the use of incorrect
packaging, even where the unit is still
under guarantee.
Important information
1035200220L02 1911V002
3
EN
