Durr EcoGun 910, Operation Manual

2.2 

Intended Use

The spray gun 

Eco

Gun 910 is used exclu-

sively for spraying water-based paint and

conventional solvent-based paint. It is hand

guided and uses compressed air.
The 

Eco

Gun 910 spray gun may only be

operated in the approved EX-zones and

within the approved technical data 

Ä

 10

“Technical data”.
The 

Eco

Gun 910 spray gun is only intended

for use in application stations.

Misuse

There is a risk of death if not used properly.
Misuses include, e. g.:

Aiming the spray gun at humans or ani-

mals.
Atomization of fluid nitrogen
Combination of the spray gun with com-

ponents that are not approved by

Dürr Systems for operation.
Use of unapproved materials, see safety

data sheets
Making conversions or changes on your

own
Use of spray guns not conforming to the

device category in Ex zones.

EX labeling

 II 2G T60 °C X

II

- Device group II: all areas except

mining

2G

- Device category 2 for gas

T60 °C - Surface temperature, max. 60 °C

X

- Specific operating conditions for

safe operation

The following conditions must be observed

for safe operation:

Ground the spray gun.
Only use conductive hoses.
Ensure that static electricity can be dis-

charged.

Use exclusively compressed air quick

couplings for water-based materials,

where it is not necessary to keep dis-

charging static electrical charges.

2.3 

Residual risks

Explosion

Sparks, open flames and hot surfaces can

cause explosions in explosive atmospheres.

Serious injuries and death can be the conse-

quence.

Before carrying out any work, ensure a

non-explosive atmosphere.
Do not use sources of ignition and open

light.
Do not smoke.
Ground the product.
Ground the work piece.
Only use conductive lines.

Flammable coating materials and their deter-

gents and cleaning agents can cause a fire

or an explosion.

Ensure that the flashpoint of the fluid is at

least 15 K above the ambient tempera-

ture.
Note explosion group of the fluid.
Follow safety data sheets.
Ensure that forced ventilation and fire

protection equipment are in operation.
Do not use any sources of ignition and

open light.
Do not smoke.

Danger from harmful or irritant sub-
stances

Contact with hazardous liquids or vapors,

can result in serious injury or death.

Ensure that the forced ventilation is

operational.
Follow safety data sheets.
Wear specified protective equipment.

Escaping material

Material escaping under pressure can cause

serious injuries.

Safety

05/2018

EcoGun 910 - MSG00003EN

5/32