Fitting instructions
450
±
50mm
GB
Determine the height of the seat. A distance of 45 cm is
recommended from either bathroom floor, or floor of the
shower tray, to the underside of the seat when hinged
down (equivalent to 55 cm from the lower edge of the
mounting plate). For personal preference the seat can be
situated higher or lower according to your body height.
Fix the mounting plate horizontally at the required
height. Mark the positions of the 3 fixing drillings by
using the mounting plate as a drilling template. Be sure
that there are no water pipes or electrical wiring behind
the location you intend to fix the seat to.
Drill the marked holes with a 8 mm diameter masonry
drill to a minimum of 80 mm.
Insert the supplied wall plugs.
Caution!
The supplied fixing material is suitable for stone walls.
For lightweight walls you’ll need special fixings.
