4
Parts & Operations Manual
Labrador
Technical Information
General description
This machine is a scrubber dryer for washing and drying flat, horizontal, smooth or moderately rough, even and obstacle free
floors in civil and industrial premises.
The scrubber dryer spreads a solution of water and detergent in the correct concentration on the floor and then scrubs it to
remove the dirt. By carefully choosing the detergent and brushes (or abrasive disks) from the wide range of accessories available,
the machine can be adapted to a wide range of combinations of types of floor and dirt.
A suction system incorporated in the machine dries the floor after washing by means of the low pressure generated in the dirty
water tank by the suction motor. The squeegee connected to the tank collects the dirty water.
Key
The main parts of the machine are as follows:
•
The tank (Fig.1-ref.1), contains and carries the mixture of clean water and cleaning product and collects the dirty water
picked up from the floor after washing.
•
Control panel (Fig. 1-ref. 2).
•
Head assembly (Fig. 1-ref. 3): the main element comprises the brushes/rollers which distribute the detergent solution
onto the floor and remove the dirt.
•
Squeegee assembly (Fig. 1-ref. 4): wipes and dries the floor by collecting the water.
Hazard areas
•
Control panel: risk of injury from short circuits.
•
Tank assembly: when using certain detergents, danger of irritation for eyes, skin, mucous membranes and respiratory
tract and of asphyxia. Danger represented by the dirt collected from the environment (germs and chemical substances).
Danger of crushing between the two tanks when the dirty water tank is replaced on top of the detergent tank.
•
Washing head assembly: danger due to brush rotation.
•
Front/rear wheels: risk of crushing between the wheels and chassis.
•
Motor/battery compartment: danger of short circuit between the battery poles and presence of hydrogen
during charging.
Accessories
•
Soft, hard and abrasive brushes.
•
Pad Driver and Pads
•
Chem-Dose tank.
